NY3PD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NY3PD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*	InetIn*
1789959603	243 Pkts	243 Pkts	48 C	68 Pkts
1789957803	298 Pkts	298 Pkts	48 C	26 Pkts
1789956003	318 Pkts	317 Pkts	48 C	40 Pkts
1789954203	359 Pkts	359 Pkts	48 C	10 Pkts
1789952403	144 Pkts	142 Pkts	49 C	53 Pkts
1789950603	160 Pkts	158 Pkts	48 C	22 Pkts
1789948803	118 Pkts	116 Pkts	48 C	44 Pkts
1789947003	104 Pkts	104 Pkts	48 C	22 Pkts
1789945203	110 Pkts	109 Pkts	48 C	69 Pkts
1789943403	122 Pkts	121 Pkts	48 C	23 Pkts
1789941603	122 Pkts	120 Pkts	48 C	37 Pkts
1789939803	114 Pkts	114 Pkts	49 C	21 Pkts
1789938003	117 Pkts	116 Pkts	48 C	67 Pkts
1789936203	129 Pkts	129 Pkts	48 C	24 Pkts
1789934403	133 Pkts	133 Pkts	48 C	68 Pkts
1789932603	171 Pkts	170 Pkts	48 C	23 Pkts
1789930803	115 Pkts	114 Pkts	48 C	44 Pkts
1789929003	93 Pkts	93 Pkts	48 C	9 Pkts
1789927203	115 Pkts	115 Pkts	49 C	22 Pkts
1789925403	96 Pkts	96 Pkts	48 C	8 Pkts
1789923603	96 Pkts	96 Pkts	48 C	32 Pkts
1789921803	197 Pkts	197 Pkts	48 C	11 Pkts
1789920003	280 Pkts	280 Pkts	48 C	51 Pkts
1789918203	319 Pkts	319 Pkts	48 C	29 Pkts
1789916403	138 Pkts	138 Pkts	48 C	86 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetIn: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)