DB0WOT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0WOT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1784673149	13.88 Volt	470 Pkt	170 Pkt	55 Pcnt	24 C
1784672849	13.88 Volt	470 Pkt	170 Pkt	55 Pcnt	24 C
1784672549	13.88 Volt	470 Pkt	180 Pkt	55 Pcnt	24 C
1784672249	13.88 Volt	470 Pkt	180 Pkt	56 Pcnt	24 C
1784671949	13.88 Volt	470 Pkt	180 Pkt	56 Pcnt	24 C
1784671649	13.88 Volt	470 Pkt	180 Pkt	57 Pcnt	24 C
1784671349	13.88 Volt	470 Pkt	180 Pkt	56 Pcnt	24 C
1784671050	13.88 Volt	480 Pkt	180 Pkt	57 Pcnt	24 C
1784670749	13.88 Volt	480 Pkt	180 Pkt	58 Pcnt	24 C
1784670449	13.88 Volt	490 Pkt	190 Pkt	57 Pcnt	24 C
1784670150	13.88 Volt	490 Pkt	180 Pkt	57 Pcnt	24 C
1784669849	13.88 Volt	510 Pkt	190 Pkt	58 Pcnt	24 C
1784669549	13.88 Volt	500 Pkt	180 Pkt	59 Pcnt	24.5 C
1784669249	13.88 Volt	510 Pkt	180 Pkt	58 Pcnt	24.5 C
1784668950	13.88 Volt	510 Pkt	180 Pkt	59 Pcnt	24.5 C
1784668650	13.88 Volt	520 Pkt	180 Pkt	59 Pcnt	24.5 C
1784668350	13.88 Volt	550 Pkt	190 Pkt	59 Pcnt	24.5 C
1784668050	13.88 Volt	560 Pkt	190 Pkt	60 Pcnt	24.5 C
1784667750	13.88 Volt	580 Pkt	190 Pkt	60 Pcnt	24.5 C
1784667450	13.88 Volt	570 Pkt	190 Pkt	58 Pcnt	24.5 C
1784667150	13.88 Volt	580 Pkt	190 Pkt	58 Pcnt	25 C
1784666850	13.88 Volt	590 Pkt	190 Pkt	58 Pcnt	25 C
1784666550	13.88 Volt	590 Pkt	190 Pkt	57 Pcnt	25 C
1784666250	13.88 Volt	580 Pkt	190 Pkt	57 Pcnt	25 C
1784665950	13.88 Volt	590 Pkt	200 Pkt	59 Pcnt	25 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)