9W2FHG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2FHG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1765532606	63 Pkt	1 Pkt	-78 dBm	5 V
1765530779	21 Pkt	2 Pkt	-78 dBm	5.02 V
1765528955	50 Pkt	0 Pkt	-78 dBm	5 V
1765527127	17 Pkt	0 Pkt	-75 dBm	5 V
1765525304	15 Pkt	0 Pkt	-76 dBm	5 V
1765523480	14 Pkt	0 Pkt	-76 dBm	5.02 V
1765521663	36 Pkt	0 Pkt	-78 dBm	5 V
1765519831	0 Pkt	0 Pkt	-78 dBm	5 V
1765517953	42 Pkt	0 Pkt	-77 dBm	5 V
1765516128	12 Pkt	0 Pkt	-76 dBm	5.02 V
1765514305	11 Pkt	0 Pkt	-75 dBm	5 V
1765512482	5 Pkt	0 Pkt	-74 dBm	5 V
1765510658	6 Pkt	0 Pkt	-79 dBm	5.02 V
1765508835	13 Pkt	0 Pkt	-77 dBm	5 V
1765507012	44 Pkt	2 Pkt	-77 dBm	5 V
1765505188	31 Pkt	0 Pkt	-77 dBm	5 V
1765503362	17 Pkt	1 Pkt	-78 dBm	5 V
1765501539	51 Pkt	0 Pkt	-78 dBm	5 V
1765499714	49 Pkt	1 Pkt	-79 dBm	5 V
1765489690	7 Pkt	2 Pkt	-73 dBm	5 V
1765487867	7 Pkt	2 Pkt	-74 dBm	5 V
1765486044	12 Pkt	0 Pkt	-75 dBm	5 V
1765484221	10 Pkt	4 Pkt	-74 dBm	5 V
1765482398	0 Pkt	0 Pkt	-74 dBm	5 V
1765480523	9 Pkt	2 Pkt	-75 dBm	5 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)