SR9WXP Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXP. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Visc10min*	Digi10min*	Vbatt*	Tempre*
1785271185	116 Pkt	5 Pkt	2 Pkt	12.3 V	14.5 DegC
1785271184	116 Pkt	5 Pkt	2 Pkt	12.3 V	14.5 DegC
1785270998	142 Pkt	7 Pkt	8 Pkt	12.32 V	14.5 DegC
1785270582	142 Pkt	7 Pkt	8 Pkt	12.32 V	14.5 DegC
1785270582	142 Pkt	7 Pkt	8 Pkt	12.32 V	14.5 DegC
1785269983	121 Pkt	3 Pkt	4 Pkt	12.32 V	14.5 DegC
1785269982	121 Pkt	3 Pkt	4 Pkt	12.32 V	14.5 DegC
1785269438	124 Pkt	3 Pkt	7 Pkt	12.34 V	14.5 DegC
1785269383	124 Pkt	3 Pkt	7 Pkt	12.34 V	14.5 DegC
1785269382	124 Pkt	3 Pkt	7 Pkt	12.34 V	14.5 DegC
1785269071	129 Pkt	6 Pkt	6 Pkt	12.34 V	15 DegC
1785268782	129 Pkt	6 Pkt	6 Pkt	12.34 V	15 DegC
1785268782	129 Pkt	6 Pkt	6 Pkt	12.34 V	15 DegC
1785268180	89 Pkt	3 Pkt	5 Pkt	12.34 V	15 DegC
1785268179	89 Pkt	3 Pkt	5 Pkt	12.34 V	15 DegC
1785267664	122 Pkt	6 Pkt	5 Pkt	12.36 V	15.5 DegC
1785267581	113 Pkt	5 Pkt	4 Pkt	12.34 V	15 DegC
1785266980	122 Pkt	6 Pkt	5 Pkt	12.36 V	15.5 DegC
1785266980	122 Pkt	6 Pkt	5 Pkt	12.36 V	15.5 DegC
1785266704	132 Pkt	4 Pkt	6 Pkt	12.38 V	15.5 DegC
1785266381	132 Pkt	4 Pkt	6 Pkt	12.38 V	15.5 DegC
1785265780	101 Pkt	3 Pkt	4 Pkt	12.4 V	16 DegC
1785265780	101 Pkt	3 Pkt	4 Pkt	12.4 V	16 DegC
1785264579	115 Pkt	1 Pkt	5 Pkt	12.4 V	16.5 DegC
1785264579	115 Pkt	1 Pkt	5 Pkt	12.4 V	16.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Visc10min: 0, 1, 0

Digi10min: 0, 1, 0

Vbatt: 0, 0.02, 10

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)