EL-F1BDD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-F1BDD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Value1*	Value2*	Value3*	Value4*
1787479626	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1787479026	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1787478426	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1787477826	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1787477348	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1787381759	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	5 TXcount/10m
1787381158	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	5 TXcount/10m
1787306546	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1787305820	0 RX Erlang	0.89 TX Erlang	0 RXcount/10m	8 TXcount/10m
1787305220	0 RX Erlang	0.33 TX Erlang	0 RXcount/10m	10 TXcount/10m
1787304620	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	8 TXcount/10m
1787304020	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1787303420	0 RX Erlang	0.17 TX Erlang	0 RXcount/10m	9 TXcount/10m
1787241953	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	5 TXcount/10m
1787241353	0 RX Erlang	0.04 TX Erlang	1 RXcount/10m	6 TXcount/10m
1787240753	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1787240153	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	7 TXcount/10m
1787239553	0.13 RX Erlang	0.24 TX Erlang	3 RXcount/10m	12 TXcount/10m
1787238953	0.16 RX Erlang	0.6 TX Erlang	5 RXcount/10m	24 TXcount/10m
1787238353	0 RX Erlang	0.59 TX Erlang	0 RXcount/10m	13 TXcount/10m
1787237753	0 RX Erlang	0.46 TX Erlang	0 RXcount/10m	11 TXcount/10m
1787217173	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1787216573	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1787215973	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1787215373	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)