SR4DOS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR4DOS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	eff*
1784676369	14.03 Volt	610 Pkt	30 Pkt	80 Pcnt	71 Pcnt
1784676368	14.03 Volt	610 Pkt	30 Pkt	80 Pcnt	71 Pcnt
1784676068	14.03 Volt	620 Pkt	30 Pkt	80 Pcnt	71 Pcnt
1784675768	14.03 Volt	650 Pkt	30 Pkt	81 Pcnt	71 Pcnt
1784675468	14.03 Volt	650 Pkt	30 Pkt	80 Pcnt	71 Pcnt
1784675168	14.03 Volt	650 Pkt	30 Pkt	80 Pcnt	71 Pcnt
1784674868	14.03 Volt	630 Pkt	30 Pkt	80 Pcnt	71 Pcnt
1784674569	14.03 Volt	620 Pkt	30 Pkt	79 Pcnt	71 Pcnt
1784674568	14.03 Volt	620 Pkt	30 Pkt	79 Pcnt	71 Pcnt
1784674268	14.03 Volt	610 Pkt	30 Pkt	79 Pcnt	71 Pcnt
1784673968	14.03 Volt	610 Pkt	30 Pkt	78 Pcnt	71 Pcnt
1784673668	14.03 Volt	610 Pkt	30 Pkt	77 Pcnt	71 Pcnt
1784673368	14.03 Volt	600 Pkt	30 Pkt	77 Pcnt	71 Pcnt
1784673068	14.03 Volt	590 Pkt	30 Pkt	78 Pcnt	71 Pcnt
1784672769	14.03 Volt	580 Pkt	30 Pkt	78 Pcnt	71 Pcnt
1784672768	14.03 Volt	580 Pkt	30 Pkt	78 Pcnt	71 Pcnt
1784672468	14.03 Volt	560 Pkt	30 Pkt	78 Pcnt	71 Pcnt
1784672168	14.03 Volt	520 Pkt	30 Pkt	77 Pcnt	71 Pcnt
1784671868	14.03 Volt	520 Pkt	30 Pkt	79 Pcnt	71 Pcnt
1784671568	14.03 Volt	510 Pkt	40 Pkt	78 Pcnt	71 Pcnt
1784671277	14.03 Volt	510 Pkt	40 Pkt	78 Pcnt	71 Pcnt
1784670969	14.03 Volt	520 Pkt	50 Pkt	79 Pcnt	71 Pcnt
1784670968	14.03 Volt	520 Pkt	50 Pkt	79 Pcnt	71 Pcnt
1784670668	14.03 Volt	510 Pkt	50 Pkt	79 Pcnt	71 Pcnt
1784670368	14.03 Volt	500 Pkt	60 Pkt	79 Pcnt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)