DB0DRB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0DRB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg1h*	Eff1h*	Temp*	Vin*
1761509199	77 Pkt	5 Pkt	70 Pcnt	-64 C	13.88 Volt
1761508900	75 Pkt	5 Pkt	70 Pcnt	-64 C	13.88 Volt
1761508598	74 Pkt	5 Pkt	70 Pcnt	-64 C	13.88 Volt
1761508298	74 Pkt	5 Pkt	70 Pcnt	-64 C	13.88 Volt
1761507998	73 Pkt	5 Pkt	70 Pcnt	-64 C	13.8 Volt
1761507698	72 Pkt	5 Pkt	70 Pcnt	-64 C	13.88 Volt
1761507397	71 Pkt	5 Pkt	70 Pcnt	-64 C	13.88 Volt
1761507097	71 Pkt	5 Pkt	70 Pcnt	-64 C	13.8 Volt
1761506797	71 Pkt	5 Pkt	71 Pcnt	-64 C	13.88 Volt
1761506496	71 Pkt	5 Pkt	72 Pcnt	-64 C	13.88 Volt
1761506196	71 Pkt	5 Pkt	73 Pcnt	-64 C	13.88 Volt
1761505896	70 Pkt	6 Pkt	73 Pcnt	-64 C	13.88 Volt
1761505595	73 Pkt	6 Pkt	74 Pcnt	-64 C	13.88 Volt
1761505295	73 Pkt	6 Pkt	74 Pcnt	-64 C	13.88 Volt
1761504995	75 Pkt	6 Pkt	74 Pcnt	-64 C	13.8 Volt
1761504695	75 Pkt	6 Pkt	73 Pcnt	-64 C	13.88 Volt
1761504394	77 Pkt	7 Pkt	74 Pcnt	-64 C	13.88 Volt
1761504130	78 Pkt	7 Pkt	73 Pcnt	-64 C	13.88 Volt
1761503794	78 Pkt	7 Pkt	72 Pcnt	-64 C	13.88 Volt
1761503494	79 Pkt	7 Pkt	72 Pcnt	-64 C	13.8 Volt
1761503193	80 Pkt	7 Pkt	72 Pcnt	-64 C	13.88 Volt
1761502893	79 Pkt	7 Pkt	72 Pcnt	-64 C	13.88 Volt
1761502593	83 Pkt	8 Pkt	72 Pcnt	-64 C	13.88 Volt
1761501992	86 Pkt	8 Pkt	72 Pcnt	-64 C	13.88 Volt
1761501692	86 Pkt	8 Pkt	72 Pcnt	-64 C	13.88 Volt

*Used Equation Coefficients:

Rx1h: 0, 1, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)