K5DLF-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K5DLF-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784670780	14.63 Volt	410 Pkt	50 Pkt	82 Pcnt
1784668969	14.63 Volt	460 Pkt	50 Pkt	71 Pcnt
1784668368	14.7 Volt	470 Pkt	50 Pkt	68 Pcnt
1784667169	14.63 Volt	380 Pkt	30 Pkt	64 Pcnt
1784666569	14.7 Volt	310 Pkt	20 Pkt	63 Pcnt
1784665370	14.63 Volt	250 Pkt	20 Pkt	63 Pcnt
1784664769	14.63 Volt	220 Pkt	20 Pkt	62 Pcnt
1784663569	14.7 Volt	320 Pkt	60 Pkt	67 Pcnt
1784662969	14.7 Volt	330 Pkt	60 Pkt	67 Pcnt
1784662370	14.63 Volt	330 Pkt	60 Pkt	69 Pcnt
1784661769	14.63 Volt	330 Pkt	60 Pkt	67 Pcnt
1784661169	14.7 Volt	330 Pkt	50 Pkt	66 Pcnt
1784659970	14.7 Volt	320 Pkt	40 Pkt	66 Pcnt
1784659369	14.7 Volt	330 Pkt	40 Pkt	65 Pcnt
1784658773	14.63 Volt	350 Pkt	40 Pkt	67 Pcnt
1784657570	14.7 Volt	420 Pkt	50 Pkt	73 Pcnt
1784656979	14.7 Volt	410 Pkt	50 Pkt	73 Pcnt
1784656371	14.63 Volt	400 Pkt	40 Pkt	74 Pcnt
1784655769	14.7 Volt	400 Pkt	50 Pkt	75 Pcnt
1784653971	14.7 Volt	400 Pkt	70 Pkt	66 Pcnt
1784653382	14.7 Volt	410 Pkt	70 Pkt	66 Pcnt
1784652770	14.63 Volt	430 Pkt	70 Pkt	65 Pcnt
1784652172	14.63 Volt	460 Pkt	70 Pkt	64 Pcnt
1784651576	14.7 Volt	490 Pkt	70 Pkt	64 Pcnt
1784643191	14.63 Volt	700 Pkt	90 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)