HS1GRL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS1GRL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753540221	13 Pkt	0 Pkt	1 Pkt	-34 dBm	14.23 V
1753539296	9 Pkt	0 Pkt	1 Pkt	-35 dBm	14.21 V
1753538370	8 Pkt	0 Pkt	1 Pkt	-33 dBm	14.23 V
1753537445	10 Pkt	0 Pkt	0 Pkt	-36 dBm	14.21 V
1753536519	10 Pkt	1 Pkt	0 Pkt	-35 dBm	14.21 V
1753535593	18 Pkt	0 Pkt	1 Pkt	-35 dBm	14.19 V
1753534667	9 Pkt	0 Pkt	1 Pkt	-35 dBm	14.19 V
1753533766	8 Pkt	0 Pkt	1 Pkt	-35 dBm	14.17 V
1753532817	7 Pkt	0 Pkt	0 Pkt	-34 dBm	14.19 V
1753531892	6 Pkt	0 Pkt	0 Pkt	-39 dBm	14.21 V
1753530967	11 Pkt	0 Pkt	0 Pkt	-33 dBm	14.19 V
1753530042	9 Pkt	2 Pkt	1 Pkt	-34 dBm	14.17 V
1753528191	8 Pkt	0 Pkt	0 Pkt	-34 dBm	14.19 V
1753527265	10 Pkt	0 Pkt	0 Pkt	-33 dBm	14.21 V
1753526340	13 Pkt	0 Pkt	0 Pkt	-33 dBm	14.23 V
1753525415	11 Pkt	0 Pkt	0 Pkt	-34 dBm	14.19 V
1753524489	16 Pkt	1 Pkt	0 Pkt	-33 dBm	14.19 V
1753523562	8 Pkt	0 Pkt	0 Pkt	-32 dBm	14.15 V
1753522636	9 Pkt	0 Pkt	0 Pkt	-32 dBm	14.23 V
1753521711	16 Pkt	0 Pkt	0 Pkt	-33 dBm	14.23 V
1753520785	13 Pkt	0 Pkt	0 Pkt	-32 dBm	14.21 V
1753519860	15 Pkt	0 Pkt	0 Pkt	-33 dBm	14.21 V
1753518934	16 Pkt	0 Pkt	0 Pkt	-35 dBm	14.21 V
1753518006	19 Pkt	0 Pkt	0 Pkt	-33 dBm	14.23 V
1753517080	15 Pkt	0 Pkt	0 Pkt	-36 dBm	14.27 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)