ER-IR0CE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-IR0CE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1788565709	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788565109	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788564509	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788563909	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788563309	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788562710	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788562124	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788561509	0 RX Erlang	0.03 TX Erlang	1 RXcount/10m	4 TXcount/10m
1788560909	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	3 TXcount/10m
1788560309	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	1 TXcount/10m
1788559709	0 RX Erlang	0.26 TX Erlang	2 RXcount/10m	15 TXcount/10m
1788559109	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	15 TXcount/10m
1788558509	0 RX Erlang	0.99 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788557909	0 RX Erlang	0.94 TX Erlang	0 RXcount/10m	9 TXcount/10m
1788557309	0.1 RX Erlang	0.95 TX Erlang	1 RXcount/10m	7 TXcount/10m
1788556709	0.23 RX Erlang	0.98 TX Erlang	1 RXcount/10m	6 TXcount/10m
1788556109	0.23 RX Erlang	0.95 TX Erlang	3 RXcount/10m	10 TXcount/10m
1788555509	0.16 RX Erlang	0.96 TX Erlang	2 RXcount/10m	9 TXcount/10m
1788554909	0.35 RX Erlang	0.97 TX Erlang	3 RXcount/10m	8 TXcount/10m
1788554309	0.16 RX Erlang	0.98 TX Erlang	2 RXcount/10m	9 TXcount/10m
1788553709	0.33 RX Erlang	0.98 TX Erlang	3 RXcount/10m	8 TXcount/10m
1788553109	0.36 RX Erlang	0.98 TX Erlang	3 RXcount/10m	6 TXcount/10m
1788552509	0.28 RX Erlang	0.97 TX Erlang	7 RXcount/10m	17 TXcount/10m
1788551909	0.12 RX Erlang	0.92 TX Erlang	7 RXcount/10m	25 TXcount/10m
1788551324	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	10 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)