AA7ON-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AA7ON-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777124561	4.65 Volt	230 Pkt	810 Pkt	37440 Pcnt
1777120961	4.43 Volt	210 Pkt	810 Pkt	36470 Pcnt
1777117364	3.9 Volt	180 Pkt	810 Pkt	35104 Pcnt
1777113761	4.35 Volt	210 Pkt	810 Pkt	36815 Pcnt
1777110164	4.13 Volt	180 Pkt	810 Pkt	34119 Pcnt
1777106563	4.5 Volt	230 Pkt	810 Pkt	38666 Pcnt
1777102962	4.43 Volt	230 Pkt	810 Pkt	39057 Pcnt
1777099362	4.2 Volt	210 Pkt	800 Pkt	37147 Pcnt
1777095762	4.2 Volt	220 Pkt	800 Pkt	40070 Pcnt
1777092162	4.8 Volt	250 Pkt	800 Pkt	38819 Pcnt
1777088562	4.43 Volt	200 Pkt	800 Pkt	34915 Pcnt
1777084962	5.1 Volt	210 Pkt	800 Pkt	31149 Pcnt
1777081362	5.18 Volt	250 Pkt	800 Pkt	36075 Pcnt
1777077762	6.23 Volt	300 Pkt	810 Pkt	36829 Pcnt
1777074164	6.08 Volt	280 Pkt	800 Pkt	34969 Pcnt
1777070564	7.35 Volt	310 Pkt	800 Pkt	32349 Pcnt
1777066962	6.75 Volt	300 Pkt	800 Pkt	34333 Pcnt
1777059762	6.83 Volt	310 Pkt	800 Pkt	34497 Pcnt
1777056164	6.75 Volt	340 Pkt	800 Pkt	37873 Pcnt
1777052563	6.23 Volt	310 Pkt	800 Pkt	37740 Pcnt
1777048963	6.6 Volt	320 Pkt	800 Pkt	37003 Pcnt
1777045363	6.98 Volt	340 Pkt	800 Pkt	36286 Pcnt
1777041763	6.45 Volt	290 Pkt	800 Pkt	33641 Pcnt
1777038163	4.5 Volt	200 Pkt	800 Pkt	33717 Pcnt
1777034563	4.73 Volt	220 Pkt	800 Pkt	36018 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)