SP7UB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7UB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*
1777909678	467 Count	349 Count	282 Count	4.26 VDC
1777907877	466 Count	349 Count	282 Count	4.29 VDC
1777906077	462 Count	348 Count	281 Count	4.32 VDC
1777904276	459 Count	346 Count	279 Count	4.28 VDC
1777902475	454 Count	344 Count	277 Count	4.29 VDC
1777898881	448 Count	340 Count	273 Count	4.28 VDC
1777897080	445 Count	338 Count	271 Count	4.27 VDC
1777895280	442 Count	336 Count	269 Count	4.3 VDC
1777893479	439 Count	334 Count	267 Count	4.32 VDC
1777891678	436 Count	332 Count	265 Count	4.3 VDC
1777889877	433 Count	330 Count	263 Count	4.29 VDC
1777888077	430 Count	328 Count	261 Count	4.28 VDC
1777886276	427 Count	326 Count	259 Count	4.32 VDC
1777884475	424 Count	324 Count	257 Count	4.27 VDC
1777882674	421 Count	322 Count	255 Count	4.28 VDC
1777880874	418 Count	320 Count	253 Count	4.27 VDC
1777879073	415 Count	318 Count	251 Count	4.28 VDC
1777877285	413 Count	317 Count	250 Count	4.31 VDC
1777875484	410 Count	315 Count	248 Count	4.29 VDC
1777873683	407 Count	313 Count	246 Count	4.32 VDC
1777871883	404 Count	311 Count	244 Count	4.29 VDC
1777870082	401 Count	309 Count	242 Count	4.27 VDC
1777868281	398 Count	307 Count	240 Count	4.28 VDC
1777866480	395 Count	305 Count	238 Count	4.28 VDC
1777864680	392 Count	303 Count	236 Count	4.31 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)