W2JKT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W2JKT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765477722	0.05 Rx Erlang	0.01 Tx Erlang	42 count/10m	5 count/10m	8 count/10m
1765476523	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	13 count/10m	16 count/10m
1765474122	0.06 Rx Erlang	0.02 Tx Erlang	56 count/10m	24 count/10m	12 count/10m
1765470525	0.04 Rx Erlang	0.01 Tx Erlang	25 count/10m	3 count/10m	4 count/10m
1765469322	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	6 count/10m	10 count/10m
1765468123	0.07 Rx Erlang	0.02 Tx Erlang	59 count/10m	24 count/10m	11 count/10m
1765464523	0.06 Rx Erlang	0.01 Tx Erlang	51 count/10m	12 count/10m	13 count/10m
1765462123	0.07 Rx Erlang	0.02 Tx Erlang	52 count/10m	17 count/10m	14 count/10m
1765459722	0.07 Rx Erlang	0.02 Tx Erlang	60 count/10m	33 count/10m	18 count/10m
1765458522	0.07 Rx Erlang	0.01 Tx Erlang	63 count/10m	31 count/10m	11 count/10m
1765456122	0.08 Rx Erlang	0.01 Tx Erlang	64 count/10m	33 count/10m	10 count/10m
1765454922	0.07 Rx Erlang	0.01 Tx Erlang	53 count/10m	19 count/10m	9 count/10m
1765452522	0.07 Rx Erlang	0.01 Tx Erlang	56 count/10m	24 count/10m	11 count/10m
1765450122	0.06 Rx Erlang	0.02 Tx Erlang	51 count/10m	21 count/10m	15 count/10m
1765447722	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	8 count/10m	12 count/10m
1765446523	0.05 Rx Erlang	0.01 Tx Erlang	38 count/10m	4 count/10m	11 count/10m
1765442925	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	8 count/10m
1765441722	0.04 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	10 count/10m
1765440522	0.04 Rx Erlang	0.01 Tx Erlang	32 count/10m	1 count/10m	8 count/10m
1765439323	0.04 Rx Erlang	0.01 Tx Erlang	35 count/10m	4 count/10m	10 count/10m
1765438122	0.05 Rx Erlang	0.01 Tx Erlang	40 count/10m	5 count/10m	11 count/10m
1765436922	0.05 Rx Erlang	0.01 Tx Erlang	39 count/10m	8 count/10m	8 count/10m
1765435723	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	13 count/10m	9 count/10m
1765434522	0.04 Rx Erlang	0.01 Tx Erlang	36 count/10m	9 count/10m	8 count/10m
1765433322	0.04 Rx Erlang	0.01 Tx Erlang	38 count/10m	6 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)