SM4XRT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SM4XRT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1761783665	14 Pkt	55 Pkt	7 Pkt	-45 dBm	0.08 V
1761781839	16 Pkt	52 Pkt	5 Pkt	-45 dBm	0.08 V
1761780013	13 Pkt	48 Pkt	7 Pkt	-45 dBm	0.08 V
1761778188	14 Pkt	50 Pkt	3 Pkt	-45 dBm	0.08 V
1761776362	16 Pkt	52 Pkt	4 Pkt	-45 dBm	0.08 V
1761774537	17 Pkt	48 Pkt	2 Pkt	-45 dBm	0.08 V
1761772710	9 Pkt	48 Pkt	0 Pkt	-45 dBm	0.08 V
1761769059	15 Pkt	51 Pkt	3 Pkt	-45 dBm	0.08 V
1761767233	21 Pkt	54 Pkt	7 Pkt	-45 dBm	0.08 V
1761765406	13 Pkt	51 Pkt	9 Pkt	-45 dBm	0.08 V
1761763581	12 Pkt	56 Pkt	3 Pkt	-45 dBm	0.08 V
1761761757	16 Pkt	52 Pkt	5 Pkt	-45 dBm	0.08 V
1761759931	22 Pkt	56 Pkt	7 Pkt	-45 dBm	0.08 V
1761758103	16 Pkt	72 Pkt	10 Pkt	-46 dBm	0.08 V
1761756275	23 Pkt	88 Pkt	13 Pkt	-44 dBm	0.08 V
1761754449	17 Pkt	88 Pkt	17 Pkt	-45 dBm	0.08 V
1761750795	15 Pkt	57 Pkt	7 Pkt	-45 dBm	0.08 V
1761747143	25 Pkt	96 Pkt	15 Pkt	-46 dBm	0.08 V
1761745322	12 Pkt	69 Pkt	1 Pkt	-47 dBm	0.08 V
1761743490	22 Pkt	59 Pkt	0 Pkt	-47 dBm	0.08 V
1761741665	11 Pkt	58 Pkt	1 Pkt	-45 dBm	0.08 V
1761738014	16 Pkt	55 Pkt	2 Pkt	-45 dBm	0.08 V
1761736189	19 Pkt	58 Pkt	0 Pkt	-44 dBm	0.08 V
1761734372	18 Pkt	58 Pkt	1 Pkt	-44 dBm	0.08 V
1761732538	24 Pkt	76 Pkt	0 Pkt	-44 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)