W6SCR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6SCR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	SARBatt*	Solar*	Temp*	Rx1h*
1787563231	12.83 Volt	0.2 Volt	0.2 Volt	71.6 Deg	380 Pkt
1787562029	12.83 Volt	0.2 Volt	0.2 Volt	72.5 Deg	380 Pkt
1787560828	12.83 Volt	0.2 Volt	0.2 Volt	72.5 Deg	380 Pkt
1787559627	12.83 Volt	0.2 Volt	0.2 Volt	72.5 Deg	410 Pkt
1787558426	12.9 Volt	0.2 Volt	0.2 Volt	73.4 Deg	400 Pkt
1787557225	12.9 Volt	0.2 Volt	0.2 Volt	73.4 Deg	430 Pkt
1787556025	12.9 Volt	0.2 Volt	0.2 Volt	74.3 Deg	440 Pkt
1787554823	12.9 Volt	0.2 Volt	0.2 Volt	74.3 Deg	450 Pkt
1787553622	12.9 Volt	0.2 Volt	0.2 Volt	74.3 Deg	430 Pkt
1787552420	12.9 Volt	0.2 Volt	0.2 Volt	75.2 Deg	410 Pkt
1787551219	12.9 Volt	0.2 Volt	0.2 Volt	75.2 Deg	400 Pkt
1787550018	12.9 Volt	0.2 Volt	0.2 Volt	76.1 Deg	400 Pkt
1787548817	12.9 Volt	0.2 Volt	0.2 Volt	76.1 Deg	390 Pkt
1787547616	12.9 Volt	0.2 Volt	0.2 Volt	77 Deg	390 Pkt
1787546415	12.9 Volt	0.2 Volt	0.2 Volt	77 Deg	370 Pkt
1787545213	12.9 Volt	0.2 Volt	0.2 Volt	77.9 Deg	370 Pkt
1787544013	12.9 Volt	0.2 Volt	0.2 Volt	77.9 Deg	360 Pkt
1787542811	12.9 Volt	0.2 Volt	0.2 Volt	78.8 Deg	400 Pkt
1787541610	12.9 Volt	0.2 Volt	2 Volt	78.8 Deg	420 Pkt
1787540409	12.9 Volt	0.2 Volt	12.9 Volt	78.8 Deg	430 Pkt
1787539208	12.98 Volt	0.2 Volt	14.2 Volt	78.8 Deg	430 Pkt
1787538007	13.05 Volt	0.2 Volt	16 Volt	78.8 Deg	410 Pkt
1787535604	13.28 Volt	0.2 Volt	17.9 Volt	78.8 Deg	420 Pkt
1787534404	13.58 Volt	0.2 Volt	19.9 Volt	77.9 Deg	490 Pkt
1787533202	13.58 Volt	0.2 Volt	20.4 Volt	77.9 Deg	490 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

SARBatt: 0, 0.1, 0.2

Solar: 0, 0.1, 0.2

Temp: 0, 0.9, -83.2

Rx1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)