N0ZHZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0ZHZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1754058209	0.08 Rx Erlang	0.01 Tx Erlang	66 count/10m	4 count/10m	9 count/10m
1754057009	0.06 Rx Erlang	0.01 Tx Erlang	56 count/10m	0 count/10m	9 count/10m
1754055809	0.05 Rx Erlang	0.01 Tx Erlang	57 count/10m	0 count/10m	8 count/10m
1754054609	0.07 Rx Erlang	0.01 Tx Erlang	68 count/10m	0 count/10m	10 count/10m
1754053409	0.06 Rx Erlang	0.01 Tx Erlang	64 count/10m	0 count/10m	8 count/10m
1754052209	0.05 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	9 count/10m
1754051009	0.06 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	10 count/10m
1754049809	0.07 Rx Erlang	0.01 Tx Erlang	60 count/10m	0 count/10m	11 count/10m
1754048609	0.06 Rx Erlang	0.01 Tx Erlang	56 count/10m	0 count/10m	10 count/10m
1754047409	0.07 Rx Erlang	0.01 Tx Erlang	62 count/10m	0 count/10m	11 count/10m
1754046209	0.07 Rx Erlang	0.01 Tx Erlang	67 count/10m	0 count/10m	11 count/10m
1754045009	0.06 Rx Erlang	0.01 Tx Erlang	55 count/10m	0 count/10m	9 count/10m
1754043809	0.04 Rx Erlang	0.01 Tx Erlang	46 count/10m	0 count/10m	10 count/10m
1754042609	0.06 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	10 count/10m
1754041409	0.05 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	8 count/10m
1754040209	0.04 Rx Erlang	0.01 Tx Erlang	42 count/10m	0 count/10m	7 count/10m
1754039009	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	0 count/10m	10 count/10m
1754037809	0.04 Rx Erlang	0.01 Tx Erlang	47 count/10m	0 count/10m	6 count/10m
1754036609	0.05 Rx Erlang	0.01 Tx Erlang	56 count/10m	0 count/10m	9 count/10m
1754035409	0.08 Rx Erlang	0.01 Tx Erlang	63 count/10m	4 count/10m	10 count/10m
1754034209	0.05 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	10 count/10m
1754033009	0.05 Rx Erlang	0.01 Tx Erlang	50 count/10m	0 count/10m	9 count/10m
1754031809	0.05 Rx Erlang	0.01 Tx Erlang	52 count/10m	0 count/10m	6 count/10m
1754030609	0.06 Rx Erlang	0.01 Tx Erlang	59 count/10m	0 count/10m	11 count/10m
1754029409	0.05 Rx Erlang	0.01 Tx Erlang	57 count/10m	0 count/10m	11 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)