EL-PR7MLS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-PR7MLS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1754322815	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	10 TXcount/10m
1754322215	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1754320415	0 RX Erlang	0.1 TX Erlang	0 RXcount/10m	13 TXcount/10m
1754319815	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	7 TXcount/10m
1754318615	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	4 TXcount/10m
1754316815	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1754316215	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	5 TXcount/10m
1754315615	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754314415	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	19 TXcount/10m
1754313815	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	18 TXcount/10m
1754313215	0 RX Erlang	0.9 TX Erlang	0 RXcount/10m	12 TXcount/10m
1754312015	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	11 TXcount/10m
1754311417	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1754310216	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754309615	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1754309015	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	4 TXcount/10m
1754308415	0.02 RX Erlang	0.06 TX Erlang	3 RXcount/10m	2 TXcount/10m
1754307215	0 RX Erlang	0.69 TX Erlang	0 RXcount/10m	9 TXcount/10m
1754306615	0 RX Erlang	0.64 TX Erlang	0 RXcount/10m	16 TXcount/10m
1754306015	0 RX Erlang	0.61 TX Erlang	0 RXcount/10m	10 TXcount/10m
1754276241	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1754275641	0.03 RX Erlang	0 TX Erlang	4 RXcount/10m	1 TXcount/10m
1754275041	0.03 RX Erlang	0 TX Erlang	3 RXcount/10m	0 TXcount/10m
1754274441	0 RX Erlang	0 TX Erlang	1 RXcount/10m	0 TXcount/10m
1754273841	0 RX Erlang	0.7 TX Erlang	0 RXcount/10m	17 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)