KC5EVE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC5EVE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1762000104	15.3 Volt	270 Pkt	110 Pkt	59 Pcnt
1761999804	15.23 Volt	270 Pkt	110 Pkt	58 Pcnt
1761999504	15.3 Volt	270 Pkt	100 Pkt	57 Pcnt
1761999204	15.3 Volt	260 Pkt	100 Pkt	57 Pcnt
1761999204	15.3 Volt	260 Pkt	100 Pkt	57 Pcnt
1761998904	15.23 Volt	260 Pkt	100 Pkt	56 Pcnt
1761998604	15.3 Volt	250 Pkt	100 Pkt	53 Pcnt
1761998304	15.23 Volt	240 Pkt	90 Pkt	52 Pcnt
1761997704	15.23 Volt	240 Pkt	100 Pkt	51 Pcnt
1761997421	15.3 Volt	240 Pkt	100 Pkt	51 Pcnt
1761997421	15.3 Volt	240 Pkt	100 Pkt	51 Pcnt
1761997104	15.3 Volt	240 Pkt	100 Pkt	49 Pcnt
1761996805	15.23 Volt	240 Pkt	100 Pkt	48 Pcnt
1761996804	15.23 Volt	240 Pkt	100 Pkt	48 Pcnt
1761996504	15.23 Volt	220 Pkt	90 Pkt	47 Pcnt
1761996205	15.23 Volt	210 Pkt	90 Pkt	46 Pcnt
1761996204	15.23 Volt	210 Pkt	90 Pkt	46 Pcnt
1761995904	15.38 Volt	200 Pkt	80 Pkt	45 Pcnt
1761995605	15.23 Volt	190 Pkt	80 Pkt	43 Pcnt
1761995604	15.23 Volt	190 Pkt	80 Pkt	43 Pcnt
1761995304	15.3 Volt	170 Pkt	70 Pkt	41 Pcnt
1761995004	15.3 Volt	160 Pkt	60 Pkt	40 Pcnt
1761994704	15.3 Volt	150 Pkt	60 Pkt	39 Pcnt
1761994405	15.3 Volt	140 Pkt	50 Pkt	40 Pcnt
1761994404	15.3 Volt	140 Pkt	50 Pkt	40 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)