IR2T Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2T. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1765441293	24 Pkt	110 Pkt	9 Pkt	40 Pkt	97 Pcnt
1765440993	26 Pkt	110 Pkt	12 Pkt	40 Pkt	97 Pcnt
1765440693	11 Pkt	110 Pkt	6 Pkt	40 Pkt	93 Pcnt
1765440392	24 Pkt	140 Pkt	11 Pkt	40 Pkt	88 Pcnt
1765439792	11 Pkt	160 Pkt	3 Pkt	40 Pkt	82 Pcnt
1765439191	20 Pkt	160 Pkt	10 Pkt	40 Pkt	81 Pcnt
1765438907	9 Pkt	180 Pkt	4 Pkt	50 Pkt	83 Pcnt
1765438591	26 Pkt	220 Pkt	8 Pkt	70 Pkt	84 Pcnt
1765438290	28 Pkt	250 Pkt	9 Pkt	80 Pkt	83 Pcnt
1765437990	10 Pkt	240 Pkt	4 Pkt	80 Pkt	83 Pcnt
1765437690	24 Pkt	250 Pkt	8 Pkt	80 Pkt	83 Pcnt
1765437390	51 Pkt	250 Pkt	9 Pkt	80 Pkt	82 Pcnt
1765437089	49 Pkt	250 Pkt	7 Pkt	80 Pkt	84 Pcnt
1765436789	50 Pkt	230 Pkt	11 Pkt	80 Pkt	85 Pcnt
1765436489	36 Pkt	210 Pkt	9 Pkt	80 Pkt	90 Pcnt
1765436188	10 Pkt	200 Pkt	4 Pkt	80 Pkt	91 Pcnt
1765435888	41 Pkt	200 Pkt	16 Pkt	70 Pkt	91 Pcnt
1765435588	77 Pkt	200 Pkt	36 Pkt	80 Pkt	92 Pcnt
1765435288	71 Pkt	180 Pkt	34 Pkt	70 Pkt	90 Pcnt
1765434987	48 Pkt	150 Pkt	19 Pkt	50 Pkt	92 Pcnt
1765434687	33 Pkt	120 Pkt	8 Pkt	40 Pkt	95 Pcnt
1765434387	22 Pkt	120 Pkt	4 Pkt	40 Pkt	95 Pcnt
1765434086	28 Pkt	110 Pkt	9 Pkt	40 Pkt	96 Pcnt
1765433797	26 Pkt	110 Pkt	8 Pkt	40 Pkt	98 Pcnt
1765433486	9 Pkt	100 Pkt	4 Pkt	40 Pkt	99 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)