Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object CT1FSM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Vin* Rx1h* Dg1h* Eff1h* A5*
1757549067 11.48 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757548767 11.48 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757548467 11.48 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757548167 11.48 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757547867 11.48 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757547567 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757547267 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757546967 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757546667 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757546367 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757546067 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757545767 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757545467 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757545167 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757544867 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757544567 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757544267 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757543967 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757543667 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757543367 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757543067 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757542767 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757542467 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757542167 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
1757541867 11.55 Volt 0 Pkt 0 Pkt 100 Pcnt 0 None
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)