KI5LVN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KI5LVN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757519856	12.6 Volt	550 Pkt	100 Pkt	46 Pcnt
1757429859	12.6 Volt	1140 Pkt	170 Pkt	70 Pcnt
1757429261	12.6 Volt	1200 Pkt	180 Pkt	70 Pcnt
1757428659	12.6 Volt	1230 Pkt	180 Pkt	70 Pcnt
1757428059	12.6 Volt	1190 Pkt	180 Pkt	69 Pcnt
1757426861	12.6 Volt	1140 Pkt	170 Pkt	68 Pcnt
1757424459	12.6 Volt	1010 Pkt	180 Pkt	68 Pcnt
1757419659	12.6 Volt	970 Pkt	180 Pkt	64 Pcnt
1757341661	12.6 Volt	1320 Pkt	190 Pkt	69 Pcnt
1757341062	12.6 Volt	1410 Pkt	200 Pkt	69 Pcnt
1757340469	12.6 Volt	1440 Pkt	210 Pkt	69 Pcnt
1757339861	12.6 Volt	1510 Pkt	230 Pkt	69 Pcnt
1757339271	12.6 Volt	1490 Pkt	250 Pkt	70 Pcnt
1757328465	12.6 Volt	1030 Pkt	190 Pkt	65 Pcnt
1757326663	12.6 Volt	1000 Pkt	180 Pkt	66 Pcnt
1757326061	12.6 Volt	910 Pkt	170 Pkt	65 Pcnt
1757325463	12.6 Volt	860 Pkt	160 Pkt	64 Pcnt
1757324864	12.6 Volt	830 Pkt	150 Pkt	64 Pcnt
1757324261	12.6 Volt	810 Pkt	150 Pkt	63 Pcnt
1757323661	12.6 Volt	780 Pkt	150 Pkt	63 Pcnt
1757322461	12.6 Volt	720 Pkt	130 Pkt	62 Pcnt
1757320062	12.6 Volt	610 Pkt	120 Pkt	60 Pcnt
1757254065	12.6 Volt	910 Pkt	180 Pkt	62 Pcnt
1757245664	12.6 Volt	820 Pkt	190 Pkt	63 Pcnt
1757244472	12.6 Volt	780 Pkt	170 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)