ED5YAL-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED5YAL-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1787497743	13.62 Volt	60 Pkt	30 Pkt	79 Pcnt	85 Pcnt
1787482743	14.21 Volt	40 Pkt	20 Pkt	93 Pcnt	86 Pcnt
1787482143	14.21 Volt	40 Pkt	30 Pkt	94 Pcnt	86 Pcnt
1787481543	14.21 Volt	40 Pkt	20 Pkt	95 Pcnt	85 Pcnt
1787480943	14.21 Volt	40 Pkt	20 Pkt	93 Pcnt	85 Pcnt
1787480343	13.76 Volt	30 Pkt	20 Pkt	92 Pcnt	85 Pcnt
1787479743	14.21 Volt	30 Pkt	20 Pkt	92 Pcnt	85 Pcnt
1787479143	14.21 Volt	30 Pkt	20 Pkt	92 Pcnt	85 Pcnt
1787478543	14.21 Volt	30 Pkt	20 Pkt	88 Pcnt	84 Pcnt
1787477943	14.21 Volt	40 Pkt	20 Pkt	89 Pcnt	84 Pcnt
1787476743	14.21 Volt	50 Pkt	30 Pkt	80 Pcnt	84 Pcnt
1787476143	13.25 Volt	60 Pkt	40 Pkt	72 Pcnt	84 Pcnt
1787475543	13.76 Volt	80 Pkt	60 Pkt	70 Pcnt	84 Pcnt
1787474943	14.21 Volt	90 Pkt	60 Pkt	73 Pcnt	84 Pcnt
1787474343	13.84 Volt	120 Pkt	90 Pkt	77 Pcnt	84 Pcnt
1787473743	14.21 Volt	140 Pkt	100 Pkt	76 Pcnt	84 Pcnt
1787473144	14.06 Volt	150 Pkt	110 Pkt	78 Pcnt	85 Pcnt
1787472543	14.21 Volt	160 Pkt	120 Pkt	86 Pcnt	89 Pcnt
1787471943	13.76 Volt	170 Pkt	130 Pkt	89 Pcnt	91 Pcnt
1787471343	14.21 Volt	180 Pkt	140 Pkt	90 Pcnt	90 Pcnt
1787329941	13.76 Volt	20 Pkt	10 Pkt	68 Pcnt	66 Pcnt
1787329341	13.69 Volt	10 Pkt	10 Pkt	90 Pcnt	71 Pcnt
1787328741	13.69 Volt	20 Pkt	10 Pkt	75 Pcnt	70 Pcnt
1787323505	13.69 Volt	30 Pkt	10 Pkt	64 Pcnt	74 Pcnt
1787322905	13.69 Volt	30 Pkt	10 Pkt	61 Pcnt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)