XE2OR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2OR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*
1776675829	0.38 Load	62.3 DegC	55 Mb	0 Pkt
1776675529	0.43 Load	62.3 DegC	51 Mb	0 Pkt
1776675232	0.34 Load	62.3 DegC	53 Mb	0 Pkt
1776674929	0.41 Load	62.3 DegC	56 Mb	1 Pkt
1776674632	0.3 Load	62.3 DegC	56 Mb	0 Pkt
1776674329	0.28 Load	62.3 DegC	55 Mb	0 Pkt
1776674029	0.3 Load	62.3 DegC	55 Mb	1 Pkt
1776673728	0.3 Load	62.3 DegC	47 Mb	0 Pkt
1776673432	0.45 Load	62.3 DegC	49 Mb	0 Pkt
1776673129	0.52 Load	62.3 DegC	53 Mb	0 Pkt
1776672833	0.41 Load	62.3 DegC	54 Mb	0 Pkt
1776672529	0.32 Load	62.3 DegC	54 Mb	1 Pkt
1776672229	0.3 Load	62.3 DegC	54 Mb	1 Pkt
1776671929	0.35 Load	61.76 DegC	53 Mb	0 Pkt
1776671633	0.35 Load	62.3 DegC	53 Mb	0 Pkt
1776671329	0.4 Load	62.3 DegC	53 Mb	1 Pkt
1776671033	0.45 Load	61.76 DegC	54 Mb	1 Pkt
1776670729	0.46 Load	62.3 DegC	54 Mb	0 Pkt
1776670429	0.48 Load	61.76 DegC	53 Mb	0 Pkt
1776670129	0.38 Load	62.84 DegC	55 Mb	1 Pkt
1776669833	0.37 Load	61.76 DegC	51 Mb	0 Pkt
1776669529	0.4 Load	62.3 DegC	55 Mb	1 Pkt
1776669233	0.28 Load	62.3 DegC	54 Mb	0 Pkt
1776668929	0.26 Load	61.76 DegC	51 Mb	1 Pkt
1776668628	0.28 Load	62.3 DegC	55 Mb	0 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)