Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object TA4AIX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1765540193 18 Pkt 0 Pkt 0 Pkt -73 dBm 11.14 V
1765538347 27 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765537427 38 Pkt 0 Pkt 0 Pkt -76 dBm 11.14 V
1765536499 31 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765535574 30 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765534650 24 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765533726 30 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765532801 24 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765531875 34 Pkt 0 Pkt 0 Pkt -73 dBm 11.14 V
1765530949 33 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765530023 25 Pkt 0 Pkt 0 Pkt -73 dBm 11.14 V
1765529099 19 Pkt 0 Pkt 0 Pkt -73 dBm 11.14 V
1765528176 17 Pkt 0 Pkt 0 Pkt -73 dBm 11.14 V
1765527253 15 Pkt 0 Pkt 0 Pkt -73 dBm 11.14 V
1765525407 15 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765524485 4 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765523562 12 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765522639 10 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765521717 12 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765520796 16 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765519872 18 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765518949 13 Pkt 0 Pkt 0 Pkt -75 dBm 11.14 V
1765518026 9 Pkt 0 Pkt 0 Pkt -74 dBm 11.14 V
1765517103 8 Pkt 0 Pkt 0 Pkt -77 dBm 11.14 V
1765516180 7 Pkt 0 Pkt 0 Pkt -76 dBm 11.14 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)