HP1PCS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1PCS-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788660213	13.28 Volt	120 Pkt	80 Pkt	66 Pcnt
1788659012	13.13 Volt	130 Pkt	80 Pkt	65 Pcnt
1788658411	13.28 Volt	130 Pkt	90 Pkt	63 Pcnt
1788657811	13.28 Volt	140 Pkt	90 Pkt	61 Pcnt
1788656610	13.13 Volt	140 Pkt	90 Pkt	60 Pcnt
1788656009	13.28 Volt	140 Pkt	90 Pkt	59 Pcnt
1788655408	13.28 Volt	140 Pkt	90 Pkt	59 Pcnt
1788654207	13.28 Volt	130 Pkt	80 Pkt	64 Pcnt
1788653606	13.28 Volt	130 Pkt	70 Pkt	63 Pcnt
1788652406	13.28 Volt	120 Pkt	70 Pkt	63 Pcnt
1788651805	13.28 Volt	120 Pkt	70 Pkt	62 Pcnt
1788651204	13.28 Volt	120 Pkt	70 Pkt	61 Pcnt
1788650603	13.28 Volt	110 Pkt	70 Pkt	60 Pcnt
1788650003	13.28 Volt	110 Pkt	70 Pkt	61 Pcnt
1788649402	13.28 Volt	110 Pkt	70 Pkt	62 Pcnt
1788648802	13.28 Volt	110 Pkt	70 Pkt	61 Pcnt
1788648202	13.28 Volt	110 Pkt	70 Pkt	62 Pcnt
1788647601	13.28 Volt	110 Pkt	70 Pkt	63 Pcnt
1788647001	13.28 Volt	110 Pkt	70 Pkt	62 Pcnt
1788646399	13.28 Volt	110 Pkt	70 Pkt	62 Pcnt
1788645799	13.28 Volt	110 Pkt	70 Pkt	62 Pcnt
1788645198	13.28 Volt	110 Pkt	70 Pkt	65 Pcnt
1788644598	13.28 Volt	110 Pkt	80 Pkt	67 Pcnt
1788643398	13.28 Volt	120 Pkt	80 Pkt	69 Pcnt
1788642796	13.28 Volt	120 Pkt	80 Pkt	70 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)