DM0RLB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM0RLB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788640112	13.75 Volt	670 Pkt	40 Pkt	73 Pcnt
1788638732	13.75 Volt	670 Pkt	40 Pkt	70 Pcnt
1788637352	13.75 Volt	720 Pkt	50 Pkt	67 Pcnt
1788635972	13.75 Volt	750 Pkt	60 Pkt	67 Pcnt
1788634592	13.75 Volt	790 Pkt	50 Pkt	69 Pcnt
1788633212	13.75 Volt	760 Pkt	50 Pkt	70 Pcnt
1788631832	13.75 Volt	740 Pkt	50 Pkt	71 Pcnt
1788630452	13.75 Volt	690 Pkt	40 Pkt	70 Pcnt
1788629073	13.75 Volt	700 Pkt	40 Pkt	73 Pcnt
1788627692	13.75 Volt	710 Pkt	40 Pkt	72 Pcnt
1788626312	13.75 Volt	720 Pkt	40 Pkt	71 Pcnt
1788624932	13.67 Volt	750 Pkt	40 Pkt	72 Pcnt
1788623552	13.75 Volt	770 Pkt	50 Pkt	74 Pcnt
1788622173	13.75 Volt	730 Pkt	60 Pkt	70 Pcnt
1788620792	13.75 Volt	770 Pkt	60 Pkt	70 Pcnt
1788619413	13.75 Volt	840 Pkt	70 Pkt	72 Pcnt
1788618033	13.75 Volt	830 Pkt	80 Pkt	71 Pcnt
1788616653	13.75 Volt	800 Pkt	100 Pkt	73 Pcnt
1788615274	13.75 Volt	810 Pkt	100 Pkt	74 Pcnt
1788613893	13.75 Volt	820 Pkt	100 Pkt	75 Pcnt
1788612513	13.75 Volt	880 Pkt	80 Pkt	73 Pcnt
1788611133	13.75 Volt	900 Pkt	60 Pkt	73 Pcnt
1788609753	13.75 Volt	850 Pkt	60 Pkt	73 Pcnt
1788608373	13.75 Volt	790 Pkt	50 Pkt	73 Pcnt
1788606993	13.75 Volt	840 Pkt	40 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)