ED6ZAB-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED6ZAB-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757534549	13.65 Volt	70 Pkt	40 Pkt	32 Pcnt
1757534250	13.65 Volt	70 Pkt	40 Pkt	32 Pcnt
1757534249	13.65 Volt	70 Pkt	40 Pkt	32 Pcnt
1757533949	13.65 Volt	60 Pkt	40 Pkt	31 Pcnt
1757533650	13.65 Volt	70 Pkt	40 Pkt	35 Pcnt
1757533649	13.65 Volt	70 Pkt	40 Pkt	35 Pcnt
1757533349	13.65 Volt	70 Pkt	40 Pkt	34 Pcnt
1757533050	13.65 Volt	80 Pkt	50 Pkt	35 Pcnt
1757533049	13.65 Volt	80 Pkt	50 Pkt	35 Pcnt
1757532755	13.65 Volt	80 Pkt	50 Pkt	36 Pcnt
1757532450	13.65 Volt	90 Pkt	60 Pkt	37 Pcnt
1757532449	13.65 Volt	90 Pkt	60 Pkt	37 Pcnt
1757532149	13.5 Volt	90 Pkt	60 Pkt	36 Pcnt
1757531850	13.65 Volt	100 Pkt	70 Pkt	39 Pcnt
1757531849	13.65 Volt	100 Pkt	70 Pkt	39 Pcnt
1757531549	13.65 Volt	100 Pkt	70 Pkt	36 Pcnt
1757530949	13.73 Volt	120 Pkt	80 Pkt	39 Pcnt
1757530650	13.73 Volt	120 Pkt	80 Pkt	40 Pcnt
1757530649	13.73 Volt	120 Pkt	80 Pkt	40 Pcnt
1757530349	13.73 Volt	120 Pkt	80 Pkt	39 Pcnt
1757530050	13.73 Volt	120 Pkt	80 Pkt	39 Pcnt
1757530049	13.73 Volt	120 Pkt	80 Pkt	39 Pcnt
1757529749	13.73 Volt	120 Pkt	80 Pkt	41 Pcnt
1757529450	13.73 Volt	120 Pkt	80 Pkt	42 Pcnt
1757529449	13.73 Volt	120 Pkt	80 Pkt	42 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)