KD0M-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KD0M-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1788573737	217 Pkts	210 Pkts	15 Pkts	17 C
1788570137	235 Pkts	234 Pkts	34 Pkts	17 C
1788566537	222 Pkts	217 Pkts	18 Pkts	17 C
1788562937	260 Pkts	254 Pkts	56 Pkts	19 C
1788559337	221 Pkts	218 Pkts	27 Pkts	19 C
1788555737	238 Pkts	234 Pkts	34 Pkts	17 C
1788552137	210 Pkts	206 Pkts	30 Pkts	17 C
1788548537	130 Pkts	128 Pkts	15 Pkts	17 C
1788544937	109 Pkts	107 Pkts	9 Pkts	17 C
1788541344	76 Pkts	73 Pkts	7 Pkts	17 C
1788537737	102 Pkts	97 Pkts	28 Pkts	16 C
1788534139	150 Pkts	143 Pkts	18 Pkts	16 C
1788530537	230 Pkts	226 Pkts	89 Pkts	15 C
1788526937	131 Pkts	127 Pkts	54 Pkts	15 C
1788523337	165 Pkts	162 Pkts	25 Pkts	14 C
1788519737	205 Pkts	195 Pkts	27 Pkts	15 C
1788516137	183 Pkts	176 Pkts	27 Pkts	15 C
1788512537	172 Pkts	162 Pkts	22 Pkts	15 C
1788508937	216 Pkts	205 Pkts	19 Pkts	16 C
1788505337	235 Pkts	225 Pkts	15 Pkts	16 C
1788501739	264 Pkts	253 Pkts	13 Pkts	16 C
1788498137	245 Pkts	233 Pkts	16 Pkts	16 C
1788494537	231 Pkts	219 Pkts	14 Pkts	16 C
1788490937	240 Pkts	227 Pkts	17 Pkts	17 C
1788487337	221 Pkts	208 Pkts	11 Pkts	17 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)