CE3SUR-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Sate*	Temp*	Volt*	Alt*
1789941746	12	823 C	413 V	51 M
1789941591	12	815 C	415 V	52 M
1789941327	12	814 C	414 V	49 M
1789938745	12	803 C	415 V	51 M
1789934545	12	791 C	410 V	49 M
1789934080	12	795 C	414 V	50 M
1789933728	12	790 C	414 V	53 M
1789933249	12	778 C	415 V	53 M
1789932223	12	780 C	414 V	51 M
1789929837	12	770 C	414 V	52 M
1789925636	12	758 C	416 V	53 M
1789921433	12	746 C	415 V	52 M
1789917232	12	735 C	415 V	52 M
1789913031	12	723 C	416 V	51 M
1789908828	12	713 C	415 V	51 M
1789904626	12	711 C	415 V	52 M
1789900423	12	713 C	416 V	51 M
1789896221	12	715 C	415 V	51 M
1789892018	12	717 C	415 V	52 M
1789887817	12	721 C	416 V	52 M
1789883616	12	725 C	415 V	51 M
1789879411	12	730 C	415 V	51 M
1789875209	12	745 C	415 V	51 M
1789871006	12	756 C	415 V	51 M
1789866795	12	752 C	414 V	52 M

*Used Equation Coefficients:

Sate: 0, 1, 0

Temp: 0, 1, 0

Volt: 0, 1, 0

Alt: 0, 1, 0

A5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)