XE1R-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE1R-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1787431656	13.8 Volt	20 Pkt	10 Pkt	87 Pcnt
1787431656	13.8 Volt	20 Pkt	10 Pkt	87 Pcnt
1787430456	13.8 Volt	30 Pkt	10 Pkt	75 Pcnt
1787429257	13.8 Volt	20 Pkt	10 Pkt	78 Pcnt
1787428057	13.8 Volt	30 Pkt	10 Pkt	63 Pcnt
1787428056	13.8 Volt	30 Pkt	10 Pkt	63 Pcnt
1787426857	13.8 Volt	50 Pkt	20 Pkt	67 Pcnt
1787425657	13.5 Volt	50 Pkt	10 Pkt	64 Pcnt
1787424457	13.8 Volt	50 Pkt	20 Pkt	72 Pcnt
1787424456	13.8 Volt	50 Pkt	20 Pkt	72 Pcnt
1787423257	13.8 Volt	60 Pkt	20 Pkt	73 Pcnt
1787422057	13.8 Volt	60 Pkt	20 Pkt	75 Pcnt
1787420857	13.8 Volt	30 Pkt	10 Pkt	76 Pcnt
1787420856	13.8 Volt	30 Pkt	10 Pkt	76 Pcnt
1787419657	13.8 Volt	40 Pkt	10 Pkt	79 Pcnt
1787418457	13.8 Volt	30 Pkt	10 Pkt	76 Pcnt
1787417257	13.8 Volt	20 Pkt	10 Pkt	78 Pcnt
1787417256	13.8 Volt	20 Pkt	10 Pkt	78 Pcnt
1787348025	13.8 Volt	20 Pkt	10 Pkt	81 Pcnt
1787346825	13.8 Volt	20 Pkt	10 Pkt	81 Pcnt
1787345625	13.8 Volt	10 Pkt	10 Pkt	77 Pcnt
1787345625	13.8 Volt	10 Pkt	10 Pkt	77 Pcnt
1787344425	13.8 Volt	20 Pkt	10 Pkt	76 Pcnt
1787343225	13.8 Volt	20 Pkt	10 Pkt	80 Pcnt
1787342025	13.8 Volt	10 Pkt	0 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)