HS1AL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS1AL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1785348266	38 Pkt	2 Pkt	1 Pkt	-35 dBm	12.82 V
1785347337	35 Pkt	0 Pkt	0 Pkt	-35 dBm	12.96 V
1785346408	36 Pkt	0 Pkt	0 Pkt	-35 dBm	12.84 V
1785345479	53 Pkt	0 Pkt	0 Pkt	-36 dBm	12.43 V
1785344543	46 Pkt	0 Pkt	0 Pkt	-40 dBm	12.8 V
1785343610	42 Pkt	0 Pkt	0 Pkt	-41 dBm	12.76 V
1785342682	43 Pkt	0 Pkt	0 Pkt	-35 dBm	12.82 V
1785341751	41 Pkt	0 Pkt	0 Pkt	-35 dBm	12.9 V
1785340821	30 Pkt	0 Pkt	0 Pkt	-40 dBm	12.84 V
1785339895	51 Pkt	0 Pkt	0 Pkt	-36 dBm	12.98 V
1785338962	41 Pkt	0 Pkt	0 Pkt	-34 dBm	12.82 V
1785338031	36 Pkt	2 Pkt	0 Pkt	-34 dBm	12.84 V
1785337105	43 Pkt	0 Pkt	0 Pkt	-35 dBm	12.8 V
1785336175	58 Pkt	0 Pkt	0 Pkt	-35 dBm	12.74 V
1785335245	83 Pkt	0 Pkt	0 Pkt	-39 dBm	12.8 V
1785334306	27 Pkt	0 Pkt	0 Pkt	-35 dBm	12.74 V
1785333658	33 Pkt	2 Pkt	3 Pkt	-37 dBm	12.8 V
1785332723	33 Pkt	2 Pkt	0 Pkt	-34 dBm	12.9 V
1785331793	28 Pkt	0 Pkt	0 Pkt	-37 dBm	12.9 V
1785330865	31 Pkt	1 Pkt	0 Pkt	-37 dBm	12.74 V
1785329936	37 Pkt	0 Pkt	2 Pkt	-34 dBm	12.76 V
1785329006	43 Pkt	0 Pkt	2 Pkt	-34 dBm	12.71 V
1785328076	40 Pkt	0 Pkt	2 Pkt	-35 dBm	12.74 V
1785327146	35 Pkt	0 Pkt	1 Pkt	-35 dBm	12.8 V
1785326217	27 Pkt	0 Pkt	4 Pkt	-36 dBm	12.8 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)