XE2MFT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2MFT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1780890573	0.32 Load	60.15 DegC	66 Mb	4 Pkt	3 Pkt
1780890276	0.31 Load	60.15 DegC	67 Mb	329 Pkt	61 Pkt
1780889973	0.29 Load	60.69 DegC	69 Mb	392 Pkt	68 Pkt
1780889672	0.4 Load	60.69 DegC	73 Mb	8 Pkt	3 Pkt
1780889371	0.37 Load	61.22 DegC	43 Mb	467 Pkt	255 Pkt
1780889072	0.33 Load	61.22 DegC	45 Mb	471 Pkt	61 Pkt
1780888771	0.51 Load	61.76 DegC	48 Mb	4 Pkt	3 Pkt
1780888471	0.35 Load	61.22 DegC	52 Mb	286 Pkt	46 Pkt
1780888173	0.39 Load	61.22 DegC	44 Mb	570 Pkt	264 Pkt
1780887873	0.33 Load	62.3 DegC	51 Mb	2 Pkt	3 Pkt
1780887571	0.32 Load	61.22 DegC	55 Mb	691 Pkt	57 Pkt
1780887273	0.31 Load	61.22 DegC	55 Mb	355 Pkt	155 Pkt
1780886972	0.31 Load	61.76 DegC	48 Mb	3 Pkt	3 Pkt
1780886672	0.35 Load	61.22 DegC	56 Mb	357 Pkt	60 Pkt
1780886373	0.3 Load	61.22 DegC	54 Mb	342 Pkt	62 Pkt
1780886073	0.39 Load	62.3 DegC	57 Mb	2 Pkt	3 Pkt
1780885771	0.43 Load	61.22 DegC	48 Mb	719 Pkt	168 Pkt
1780885473	0.42 Load	61.76 DegC	55 Mb	285 Pkt	64 Pkt
1780885171	0.35 Load	62.3 DegC	53 Mb	2 Pkt	3 Pkt
1780884872	0.41 Load	61.76 DegC	53 Mb	438 Pkt	175 Pkt
1780884572	0.38 Load	61.22 DegC	48 Mb	497 Pkt	174 Pkt
1780884273	0.3 Load	61.76 DegC	55 Mb	2 Pkt	3 Pkt
1780883971	0.33 Load	61.76 DegC	46 Mb	362 Pkt	56 Pkt
1780883673	0.33 Load	62.3 DegC	49 Mb	464 Pkt	174 Pkt
1780883373	0.34 Load	62.3 DegC	48 Mb	8 Pkt	3 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)