OE3LXF-37 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3LXF-37. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1784668980	996.5 hPa	23.9 C deg	1027 hPa	0 C deg
1784663545	996.2 hPa	24 C deg	1026.6 hPa	0 C deg
1784659930	995.5 hPa	24.1 C deg	1025.9 hPa	0 C deg
1784658094	995.3 hPa	24.2 C deg	1025.7 hPa	0 C deg
1784656283	995.3 hPa	24.3 C deg	1025.7 hPa	0 C deg
1784650840	995.1 hPa	24.3 C deg	1025.5 hPa	0 C deg
1784647241	994.8 hPa	24.3 C deg	1025.2 hPa	0 C deg
1784645397	994.7 hPa	24.3 C deg	1025 hPa	0 C deg
1784636339	995.1 hPa	24.1 C deg	1025.5 hPa	0 C deg
1784632700	995.7 hPa	24 C deg	1026.1 hPa	0 C deg
1784614548	997.4 hPa	23.5 C deg	1027.9 hPa	0 C deg
1784589178	996.6 hPa	24.2 C deg	1027 hPa	0 C deg
1784587303	996.6 hPa	24.2 C deg	1027 hPa	0 C deg
1784578259	995.4 hPa	24.7 C deg	1025.7 hPa	0 C deg
1784569172	993.7 hPa	25.1 C deg	1023.9 hPa	0 C deg
1784567343	993.5 hPa	25.1 C deg	1023.8 hPa	0 C deg
1784545553	994.3 hPa	24.9 C deg	1024.6 hPa	0 C deg
1784514732	994.7 hPa	23.5 C deg	1025.2 hPa	0 C deg
1784489305	993.8 hPa	25.5 C deg	1024 hPa	0 C deg
1784483845	993.1 hPa	25.9 C deg	1023.3 hPa	0 C deg
1784454805	988.4 hPa	27 C deg	1018.3 hPa	0 C deg
1784447561	989.2 hPa	26.4 C deg	1019.2 hPa	0 C deg
1784433096	989.9 hPa	25.9 C deg	1019.9 hPa	0 C deg
1784400355	988.3 hPa	27.5 C deg	1018.1 hPa	0 C deg
1784396759	987.7 hPa	27.7 C deg	1017.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)