BU2GE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BU2GE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	DiGi*
1757463444	33.2 C	98 p
1757462243	33.3 C	56 p
1757461044	33.6 C	52 p
1757459844	32.6 C	47 p
1757458644	33.4 C	40 p
1757457444	32.5 C	37 p
1757456245	33.4 C	30 p
1757455044	33.1 C	25 p
1757453844	32.3 C	20 p
1757452644	32.6 C	16 p
1757451443	33.3 C	9 p
1757450244	32.5 C	7 p
1757449044	28 C	1 p
1757447844	33.2 C	626 p
1757446644	34 C	622 p
1757445444	33.9 C	616 p
1757444243	34.3 C	610 p
1757443044	34.3 C	605 p
1757441844	33.9 C	602 p
1757440643	33.9 C	597 p
1757439444	34.3 C	594 p
1757438244	33.8 C	590 p
1757437044	33.2 C	585 p
1757435843	34.5 C	580 p
1757434644	34.4 C	573 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)