HS6KLJ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BAT*	SAT*
1788340215	12.02 V	28
1788340110	12.08 V	30
1788339891	12.11 V	29
1788339582	12.74 V	29
1788338976	12.58 V	29
1788338371	12.57 V	28
1788337765	12.57 V	28
1788337159	12.57 V	30
1788336553	12.58 V	30
1788335948	12.58 V	27
1788335342	12.58 V	26
1788334736	12.58 V	27
1788334131	12.58 V	27
1788332920	12.58 V	26
1788332314	12.58 V	26
1788331708	12.58 V	26
1788331103	12.59 V	28
1788330497	12.58 V	28
1788329891	12.58 V	28
1788329286	12.59 V	28
1788328680	12.58 V	27
1788328075	12.59 V	28
1788327469	12.59 V	26
1788326863	12.58 V	26
1788326257	12.59 V	26

*Used Equation Coefficients:

BAT: 0, 0.01, 0

SAT: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)