3Z2T-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	V_Bat*	V_Ext*
1761521045	64 Count	539 Count	4.2 VDC	0 VDC
1761519246	63 Count	533 Count	4.2 VDC	0 VDC
1761517446	62 Count	525 Count	4.21 VDC	0 VDC
1761515646	61 Count	511 Count	4.21 VDC	0 VDC
1761513848	60 Count	505 Count	4.21 VDC	0 VDC
1761512049	59 Count	498 Count	4.21 VDC	0 VDC
1761510249	58 Count	492 Count	4.21 VDC	0 VDC
1761508449	57 Count	485 Count	4.21 VDC	0 VDC
1761506649	56 Count	479 Count	4.21 VDC	0 VDC
1761503051	54 Count	466 Count	4.21 VDC	0 VDC
1761501251	53 Count	460 Count	4.21 VDC	0 VDC
1761499453	52 Count	451 Count	4.22 VDC	0 VDC
1761497652	51 Count	439 Count	4.22 VDC	0 VDC
1761495853	50 Count	423 Count	4.22 VDC	0 VDC
1761494054	49 Count	402 Count	4.22 VDC	0 VDC
1761492255	48 Count	389 Count	4.22 VDC	1.24 VDC
1761488659	46 Count	371 Count	4.22 VDC	5.38 VDC
1761486859	45 Count	348 Count	4.22 VDC	5.38 VDC
1761485062	44 Count	342 Count	4.23 VDC	5.4 VDC
1761481461	42 Count	330 Count	4.22 VDC	5.38 VDC
1761477864	40 Count	318 Count	4.22 VDC	5.38 VDC
1761476067	39 Count	312 Count	4.22 VDC	5.4 VDC
1761474269	38 Count	306 Count	4.22 VDC	5.38 VDC
1761472470	37 Count	295 Count	4.22 VDC	5.38 VDC
1761470671	36 Count	289 Count	4.22 VDC	5.38 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)