3Z2T-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	V_Bat*	V_Ext*
1788572196	108 Count	489 Count	4.09 VDC	1 VDC
1788570397	106 Count	479 Count	4.09 VDC	1 VDC
1788568597	104 Count	470 Count	4.09 VDC	1 VDC
1788566799	102 Count	460 Count	4.09 VDC	1 VDC
1788564999	100 Count	450 Count	4.09 VDC	1 VDC
1788563188	93 Count	442 Count	4.09 VDC	1 VDC
1788561387	91 Count	434 Count	4.09 VDC	1 VDC
1788559588	89 Count	422 Count	4.09 VDC	1 VDC
1788557788	87 Count	415 Count	4.09 VDC	1 VDC
1788555989	85 Count	406 Count	4.09 VDC	1 VDC
1788554190	83 Count	396 Count	4.09 VDC	1 VDC
1788552391	81 Count	383 Count	4.1 VDC	1 VDC
1788550591	79 Count	372 Count	4.1 VDC	1 VDC
1788548791	77 Count	361 Count	4.1 VDC	1 VDC
1788546992	75 Count	351 Count	4.1 VDC	1 VDC
1788545193	73 Count	341 Count	4.1 VDC	1 VDC
1788543394	71 Count	311 Count	4.1 VDC	1.06 VDC
1788541585	64 Count	275 Count	4.1 VDC	2.92 VDC
1788539786	62 Count	266 Count	4.1 VDC	3.1 VDC
1788537985	60 Count	257 Count	4.11 VDC	4.4 VDC
1788536186	58 Count	249 Count	4.11 VDC	4.4 VDC
1788534387	56 Count	237 Count	4.1 VDC	4.4 VDC
1788532587	54 Count	225 Count	4.1 VDC	4.4 VDC
1788530787	52 Count	208 Count	4.11 VDC	4.4 VDC
1788528988	50 Count	200 Count	4.11 VDC	4.38 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)