OK0BAF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0BAF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	T_ext*
1788581578	5.78 Volt	530 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788580676	5.4 Volt	460 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788579777	5.7 Volt	490 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788578876	5.18 Volt	460 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788577976	5.63 Volt	500 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788577077	4.8 Volt	510 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788576177	4.58 Volt	380 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788575277	4.73 Volt	400 Pkt	1200 Pkt	381 Pcnt	-30.5 None
1788574377	4.8 Volt	490 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788573477	5.63 Volt	440 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788572577	5.48 Volt	520 Pkt	1200 Pkt	381 Pcnt	-29.5 None
1788571677	5.03 Volt	420 Pkt	1200 Pkt	381 Pcnt	-29.5 None
1788570777	4.73 Volt	460 Pkt	1210 Pkt	381 Pcnt	-29.5 None
1788569877	5.25 Volt	440 Pkt	1210 Pkt	381 Pcnt	-29.5 None
1788568977	5.1 Volt	420 Pkt	1230 Pkt	381 Pcnt	-30.5 None
1788568077	4.28 Volt	390 Pkt	1210 Pkt	381 Pcnt	-30.5 None
1788567176	4.8 Volt	430 Pkt	1200 Pkt	381 Pcnt	-30.5 None
1788566502	4.58 Volt	400 Pkt	1200 Pkt	381 Pcnt	-30.5 None
1788566277	4.58 Volt	400 Pkt	1200 Pkt	381 Pcnt	-30.5 None
1788565377	4.88 Volt	370 Pkt	1210 Pkt	381 Pcnt	-30.5 None
1788564477	4.65 Volt	350 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788563577	5.25 Volt	440 Pkt	1190 Pkt	381 Pcnt	-30.5 None
1788562677	5.1 Volt	380 Pkt	1200 Pkt	381 Pcnt	-30.5 None
1788561777	5.18 Volt	470 Pkt	1200 Pkt	381 Pcnt	-30.5 None
1788560877	4.35 Volt	400 Pkt	1200 Pkt	381 Pcnt	-30.5 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T_ext: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)