HS5SQI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1784677208	32 Pkt	0 Pkt	0 Pkt	-80 dBm	12.26 V
1784676583	23 Pkt	0 Pkt	0 Pkt	-77 dBm	12.24 V
1784675959	25 Pkt	2 Pkt	2 Pkt	-76 dBm	12.24 V
1784675336	39 Pkt	0 Pkt	0 Pkt	-77 dBm	12.22 V
1784674711	31 Pkt	0 Pkt	0 Pkt	-76 dBm	12.24 V
1784674088	32 Pkt	0 Pkt	0 Pkt	-77 dBm	12.49 V
1784673463	37 Pkt	0 Pkt	0 Pkt	-83 dBm	12.51 V
1784672840	18 Pkt	0 Pkt	0 Pkt	-77 dBm	12.49 V
1784672217	12 Pkt	0 Pkt	0 Pkt	-78 dBm	12.49 V
1784671595	22 Pkt	1 Pkt	1 Pkt	-78 dBm	12.51 V
1784670972	12 Pkt	0 Pkt	0 Pkt	-79 dBm	12.51 V
1784670349	15 Pkt	0 Pkt	0 Pkt	-78 dBm	12.51 V
1784669726	13 Pkt	0 Pkt	1 Pkt	-81 dBm	12.51 V
1784669103	8 Pkt	0 Pkt	0 Pkt	-79 dBm	12.51 V
1784668481	19 Pkt	0 Pkt	0 Pkt	-78 dBm	12.51 V
1784667858	9 Pkt	0 Pkt	0 Pkt	-82 dBm	12.51 V
1784667235	14 Pkt	0 Pkt	0 Pkt	-82 dBm	12.51 V
1784666612	19 Pkt	0 Pkt	0 Pkt	-79 dBm	12.51 V
1784665989	13 Pkt	0 Pkt	0 Pkt	-79 dBm	12.51 V
1784665366	19 Pkt	0 Pkt	0 Pkt	-80 dBm	12.55 V
1784664743	11 Pkt	0 Pkt	0 Pkt	-80 dBm	12.51 V
1784664121	20 Pkt	1 Pkt	1 Pkt	-78 dBm	12.55 V
1784663498	14 Pkt	0 Pkt	0 Pkt	-80 dBm	12.55 V
1784662874	23 Pkt	0 Pkt	0 Pkt	-80 dBm	12.55 V
1784662250	15 Pkt	0 Pkt	0 Pkt	-80 dBm	12.57 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)