HA2EBO-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HA2EBO-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	BoardTemp*	CPUTemp*	Current*
1788706551	11.77 Volt	31.06 DegC	48.23 DegC	1 A
1788704750	11.77 Volt	31.06 DegC	48.23 DegC	1 A
1788702950	11.77 Volt	31.06 DegC	46.35 DegC	0.9 A
1788701150	11.77 Volt	31.06 DegC	46.35 DegC	1 A
1788699374	11.77 Volt	31.06 DegC	46.35 DegC	0.9 A
1788697550	11.77 Volt	30.12 DegC	46.35 DegC	0.9 A
1788695750	11.77 Volt	30.12 DegC	47.29 DegC	0.9 A
1788693950	11.77 Volt	30.12 DegC	45.41 DegC	1 A
1788692150	11.77 Volt	30.12 DegC	45.41 DegC	0.9 A
1788690350	11.87 Volt	29.17 DegC	43.53 DegC	0.9 A
1788688550	11.87 Volt	29.17 DegC	42.59 DegC	0.9 A
1788686750	11.87 Volt	28.23 DegC	42.59 DegC	0.9 A
1788684950	11.87 Volt	28.23 DegC	41.65 DegC	0.9 A
1788683150	11.87 Volt	27.29 DegC	40.7 DegC	1 A
1788681350	11.87 Volt	27.29 DegC	39.76 DegC	0.9 A
1788679550	11.87 Volt	26.35 DegC	42.59 DegC	0.9 A
1788677750	11.87 Volt	26.35 DegC	38.82 DegC	0.9 A
1788675950	11.87 Volt	25.41 DegC	37.88 DegC	0.8 A
1788674150	11.87 Volt	25.41 DegC	36.94 DegC	0.9 A
1788672350	11.87 Volt	25.41 DegC	36.94 DegC	0.8 A
1788670551	11.87 Volt	24.47 DegC	36.94 DegC	0.8 A
1788668750	11.77 Volt	25.41 DegC	39.76 DegC	0.9 A
1788666951	11.87 Volt	25.41 DegC	36.94 DegC	0.8 A
1788665151	11.87 Volt	25.41 DegC	36.94 DegC	0.8 A
1788663351	11.87 Volt	25.41 DegC	37.88 DegC	0.9 A

*Used Equation Coefficients:

Voltage: 0, 0.0157, 10

BoardTemp: 0, 0.3137, 0

CPUTemp: 0, 0.3137, 20

Current: 0, 0.0118, 0

Unused: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)