MB7UE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MB7UE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1765647156	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765646856	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765646556	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765645956	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765645656	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765645356	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765645056	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765644771	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765644456	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765644156	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765643856	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765643556	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765643256	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765642956	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765642656	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765642356	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765642056	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765641756	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765641456	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765641156	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765640556	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765640256	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765639956	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765639656	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1765639356	12.72 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)