INDIAN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object INDIAN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx10m*	Eff1h*	Temp*	Vin*
1776873888	600 Pkt	96 Pkt	77 Pcnt	39.4 F	13.2 Volt
1776873588	610 Pkt	91 Pkt	77 Pcnt	39.4 F	13.28 Volt
1776873288	610 Pkt	89 Pkt	76 Pcnt	39.4 F	13.2 Volt
1776872989	600 Pkt	83 Pkt	76 Pcnt	39.4 F	13.28 Volt
1776872688	610 Pkt	95 Pkt	78 Pcnt	39.4 F	13.2 Volt
1776872388	610 Pkt	98 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776872088	610 Pkt	100 Pkt	78 Pcnt	39.4 F	13.2 Volt
1776871789	620 Pkt	94 Pkt	78 Pcnt	39.4 F	13.2 Volt
1776871489	630 Pkt	94 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776871189	640 Pkt	103 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776870901	620 Pkt	102 Pkt	78 Pcnt	39.4 F	13.2 Volt
1776870588	620 Pkt	112 Pkt	80 Pcnt	39.4 F	13.28 Volt
1776870289	610 Pkt	95 Pkt	80 Pcnt	39.4 F	13.2 Volt
1776869989	600 Pkt	86 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776869689	590 Pkt	92 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776869389	590 Pkt	81 Pkt	78 Pcnt	39.4 F	13.2 Volt
1776869089	590 Pkt	96 Pkt	78 Pcnt	39.4 F	13.2 Volt
1776868789	590 Pkt	109 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776868489	590 Pkt	112 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776868189	580 Pkt	106 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776867889	580 Pkt	88 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776867589	580 Pkt	82 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776867304	590 Pkt	93 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776866989	600 Pkt	86 Pkt	79 Pcnt	39.4 F	13.2 Volt
1776866689	590 Pkt	77 Pkt	78 Pcnt	39.4 F	13.2 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)