YO3JAZ-NK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-NK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Baro*	Power*	RSSI*	Load*
1787582992	29.5 C	950 mbar	0 W	-83 dBm	9.6 %
1787582632	29.5 C	950 mbar	160 W	-81 dBm	10 %
1787582272	29.5 C	950 mbar	140 W	-82 dBm	10 %
1787581912	29.5 C	950 mbar	160 W	-82 dBm	9.6 %
1787581552	29.5 C	950 mbar	160 W	-82 dBm	9.6 %
1787581192	29.5 C	950 mbar	200 W	-82 dBm	9.6 %
1787580832	29.5 C	950 mbar	200 W	-82 dBm	10 %
1787580472	29.5 C	950 mbar	200 W	-82 dBm	10 %
1787580112	29.5 C	950 mbar	200 W	-82 dBm	10 %
1787579752	29.5 C	950 mbar	200 W	-82 dBm	9.6 %
1787579392	29.5 C	950 mbar	200 W	-82 dBm	9.6 %
1787579032	29.5 C	950 mbar	200 W	-82 dBm	10 %
1787578672	29.5 C	950 mbar	220 W	-82 dBm	10 %
1787578312	29.5 C	950 mbar	220 W	-82 dBm	10 %
1787577952	29.5 C	950 mbar	220 W	-82 dBm	9.6 %
1787577592	29.5 C	950 mbar	220 W	-81 dBm	9.6 %
1787577232	29.5 C	950 mbar	220 W	-82 dBm	10 %
1787576872	29.5 C	950 mbar	200 W	-81 dBm	10 %
1787576512	29.5 C	950 mbar	280 W	-80 dBm	10 %
1787576152	29.5 C	950 mbar	280 W	-82 dBm	9.6 %
1787575792	29.5 C	950 mbar	280 W	-81 dBm	9.6 %
1787575432	29.5 C	950 mbar	220 W	-82 dBm	9.6 %
1787575072	29.5 C	950 mbar	340 W	-85 dBm	10.4 %
1787574712	29.5 C	950 mbar	360 W	-82 dBm	10 %
1787574352	29.5 C	950 mbar	360 W	-83 dBm	9.6 %

*Used Equation Coefficients:

Temp: 0, 0.5, -25

Baro: 0, 0.4, 950

Power: 0, 20, 0

RSSI: 0, -1, 0

Load: 0, 0.4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)