IQ3UD-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3UD-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1765650383	136 Pkt	980 Pkt	0 Pkt	0.08 Pcnt	62 Pcnt
1765650083	148 Pkt	990 Pkt	0 Pkt	0.08 Pcnt	62 Pcnt
1765649782	144 Pkt	1030 Pkt	0 Pkt	0.08 Pcnt	63 Pcnt
1765649482	145 Pkt	1060 Pkt	0 Pkt	0.08 Pcnt	63 Pcnt
1765648281	125 Pkt	1120 Pkt	0 Pkt	0.08 Pcnt	64 Pcnt
1765647981	139 Pkt	1140 Pkt	0 Pkt	0.08 Pcnt	64 Pcnt
1765647681	164 Pkt	1180 Pkt	0 Pkt	0.08 Pcnt	64 Pcnt
1765647380	175 Pkt	1200 Pkt	0 Pkt	0.08 Pcnt	64 Pcnt
1765647105	160 Pkt	1210 Pkt	0 Pkt	0.08 Pcnt	65 Pcnt
1765646780	192 Pkt	1220 Pkt	0 Pkt	0.08 Pcnt	65 Pcnt
1765646179	213 Pkt	1220 Pkt	0 Pkt	0.08 Pcnt	65 Pcnt
1765645879	172 Pkt	1200 Pkt	0 Pkt	0.08 Pcnt	65 Pcnt
1765645578	174 Pkt	1190 Pkt	0 Pkt	0.08 Pcnt	65 Pcnt
1765645278	175 Pkt	1180 Pkt	0 Pkt	0.08 Pcnt	64 Pcnt
1765644978	179 Pkt	1180 Pkt	1 Pkt	0.08 Pcnt	64 Pcnt
1765644678	182 Pkt	1170 Pkt	3 Pkt	0.08 Pcnt	64 Pcnt
1765644377	191 Pkt	1180 Pkt	3 Pkt	0.08 Pcnt	63 Pcnt
1765644077	204 Pkt	1170 Pkt	1 Pkt	0.08 Pcnt	62 Pcnt
1765643777	188 Pkt	1170 Pkt	1 Pkt	0.08 Pcnt	63 Pcnt
1765643176	194 Pkt	1130 Pkt	1 Pkt	0.08 Pcnt	61 Pcnt
1765642876	197 Pkt	1120 Pkt	2 Pkt	0.08 Pcnt	60 Pcnt
1765642576	172 Pkt	1090 Pkt	6 Pkt	0.08 Pcnt	60 Pcnt
1765642275	156 Pkt	1080 Pkt	5 Pkt	0.08 Pcnt	60 Pcnt
1765641975	166 Pkt	1080 Pkt	1 Pkt	0.08 Pcnt	61 Pcnt
1765641374	174 Pkt	1020 Pkt	0 Pkt	0.08 Pcnt	62 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)