DO1MH-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO1MH-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1766196457	957.8 hPa	3.6 C deg	100 %	1026.9 hPa	0 C deg
1766192836	958.2 hPa	3.8 C deg	100 %	1027.3 hPa	0 C deg
1766191021	958.2 hPa	4.3 C deg	100 %	1027.2 hPa	0 C deg
1766189200	958.4 hPa	4.2 C deg	100 %	1027.4 hPa	0 C deg
1766185603	958.9 hPa	4.6 C deg	100 %	1027.9 hPa	0 C deg
1766183750	959.2 hPa	4.8 C deg	100 %	1028.1 hPa	0 C deg
1766176488	960 hPa	3.2 C deg	100 %	1029.3 hPa	0 C deg
1766174677	960.4 hPa	4.1 C deg	100 %	1029.5 hPa	0 C deg
1766172855	960.5 hPa	4.6 C deg	100 %	1029.5 hPa	0 C deg
1766165595	961.2 hPa	4.7 C deg	100 %	1030.3 hPa	0 C deg
1766149652	960.7 hPa	9.6 C deg	100 %	1028.5 hPa	0 C deg
1766144213	960.3 hPa	9.2 C deg	100 %	1028.1 hPa	0 C deg
1766142392	960.1 hPa	10.2 C deg	100 %	1027.7 hPa	0 C deg
1766140579	959.9 hPa	20.7 C deg	54.6 %	1025 hPa	0 C deg
1766135161	960.2 hPa	20.5 C deg	67.4 %	1025.4 hPa	0 C deg
1766133319	960.1 hPa	16.8 C deg	100 %	1026.1 hPa	0 C deg
1766131504	960.2 hPa	11.5 C deg	100 %	1027.4 hPa	0 C deg
1766129689	960.4 hPa	8.7 C deg	100 %	1028.4 hPa	0 C deg
1766127880	960.3 hPa	-0.2 C deg	100 %	1030.6 hPa	0 C deg
1766126061	960.1 hPa	-0.3 C deg	100 %	1030.5 hPa	0 C deg
1766124247	960 hPa	-0.1 C deg	100 %	1030.3 hPa	0 C deg
1766122444	959.9 hPa	0 C deg	100 %	1030.1 hPa	0 C deg
1766120613	959.8 hPa	-0.6 C deg	100 %	1030.2 hPa	0 C deg
1766118798	959.6 hPa	-0.9 C deg	100 %	1030 hPa	0 C deg
1766113711	958.9 hPa	0.3 C deg	100 %	1028.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)