EB2BRA-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EB2BRA-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*
1788570828	3 Count	181 Count
1788569024	2 Count	150 Count
1788567221	1 Count	119 Count
1788565458	0 Count	56 Count
1788563655	17 Count	1041 Count
1788561852	16 Count	988 Count
1788560048	15 Count	954 Count
1788558245	14 Count	917 Count
1788556442	13 Count	854 Count
1788554638	12 Count	817 Count
1788552834	11 Count	771 Count
1788551030	10 Count	724 Count
1788549227	9 Count	679 Count
1788547424	8 Count	625 Count
1788545620	7 Count	566 Count
1788543859	6 Count	512 Count
1788542054	5 Count	431 Count
1788540251	4 Count	329 Count
1788538447	3 Count	261 Count
1788536644	2 Count	175 Count
1788534841	1 Count	139 Count
1788533037	0 Count	72 Count
1788531233	16 Count	1026 Count
1788529430	15 Count	958 Count
1788527626	14 Count	910 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)