OK2VOP-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK2VOP-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Hladina*	SysTemp*	SklepTemp*	ExtTemp*	ExtHum*
1761720887	87 cm	12 Celsius	10 Celsius	10 Celsius	57 Percent
1761720284	87 cm	12 Celsius	10 Celsius	9 Celsius	57 Percent
1761719078	87 cm	12 Celsius	10 Celsius	9 Celsius	58 Percent
1761718475	87 cm	12 Celsius	10 Celsius	9 Celsius	59 Percent
1761717872	87 cm	12 Celsius	10 Celsius	9 Celsius	58 Percent
1761717269	87 cm	12 Celsius	10 Celsius	9 Celsius	57 Percent
1761716063	87 cm	12 Celsius	10 Celsius	9 Celsius	57 Percent
1761715459	87 cm	12 Celsius	10 Celsius	9 Celsius	56 Percent
1761714856	87 cm	12 Celsius	10 Celsius	9 Celsius	56 Percent
1761714253	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761713650	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761713047	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761712444	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761711841	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761711238	87 cm	12 Celsius	10 Celsius	10 Celsius	57 Percent
1761710635	87 cm	12 Celsius	10 Celsius	10 Celsius	58 Percent
1761710032	87 cm	12 Celsius	10 Celsius	9 Celsius	58 Percent
1761709429	87 cm	12 Celsius	10 Celsius	9 Celsius	58 Percent
1761708826	87 cm	12 Celsius	10 Celsius	10 Celsius	57 Percent
1761708223	87 cm	12 Celsius	10 Celsius	10 Celsius	57 Percent
1761707620	87 cm	12 Celsius	10 Celsius	10 Celsius	57 Percent
1761707017	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761706414	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent
1761705811	87 cm	12 Celsius	10 Celsius	10 Celsius	57 Percent
1761705207	87 cm	12 Celsius	10 Celsius	10 Celsius	56 Percent

*Used Equation Coefficients:

Hladina: 0, -0.2, 140

SysTemp: 0, 1, 0

SklepTemp: 0, 1, -15

ExtTemp: 0, 1, -25

ExtHum: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)