TA2WI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2WI-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774448754	226 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V
1774447805	181 Pkt	4 Pkt	18 Pkt	-43 dBm	12.35 V
1774446864	206 Pkt	7 Pkt	2 Pkt	-42 dBm	12.35 V
1774445920	9 Pkt	1 Pkt	7 Pkt	-43 dBm	12.35 V
1774445539	219 Pkt	0 Pkt	1 Pkt	-43 dBm	12.35 V
1774444596	13 Pkt	0 Pkt	0 Pkt	-41 dBm	12.35 V
1774443666	231 Pkt	0 Pkt	1 Pkt	-41 dBm	12.35 V
1774442698	226 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V
1774441749	201 Pkt	0 Pkt	0 Pkt	-41 dBm	12.37 V
1774440806	228 Pkt	0 Pkt	0 Pkt	-44 dBm	12.35 V
1774439837	16 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V
1774439348	241 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V
1774438397	246 Pkt	1 Pkt	6 Pkt	-42 dBm	12.35 V
1774437449	212 Pkt	2 Pkt	1 Pkt	-43 dBm	12.35 V
1774436508	231 Pkt	0 Pkt	0 Pkt	-44 dBm	12.35 V
1774435562	256 Pkt	3 Pkt	8 Pkt	-42 dBm	12.35 V
1774434615	215 Pkt	8 Pkt	22 Pkt	-43 dBm	12.35 V
1774433668	236 Pkt	1 Pkt	3 Pkt	-43 dBm	12.37 V
1774432719	228 Pkt	0 Pkt	0 Pkt	-42 dBm	12.37 V
1774431772	235 Pkt	0 Pkt	1 Pkt	-42 dBm	12.35 V
1774430830	226 Pkt	2 Pkt	0 Pkt	-41 dBm	12.35 V
1774429887	217 Pkt	1 Pkt	0 Pkt	-42 dBm	12.37 V
1774428944	10 Pkt	3 Pkt	0 Pkt	-42 dBm	12.35 V
1774427860	210 Pkt	0 Pkt	0 Pkt	-42 dBm	12.35 V
1774426917	19 Pkt	0 Pkt	0 Pkt	-43 dBm	12.35 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)