TA4TX-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4TX-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	DcIn*	Temp*	Gps*	TxCnt*
1776968915	10.7 Volt	27.8 *C	10 Satt	155 Pcs
1776968617	10.8 Volt	28 *C	10 Satt	154 Pcs
1776968312	10.8 Volt	28 *C	9 Satt	153 Pcs
1776968012	10.8 Volt	28.1 *C	9 Satt	152 Pcs
1776967703	10.8 Volt	28.1 *C	11 Satt	151 Pcs
1776967403	10.8 Volt	28.2 *C	11 Satt	150 Pcs
1776967102	10.8 Volt	28.2 *C	11 Satt	149 Pcs
1776966802	10.9 Volt	28.3 *C	10 Satt	148 Pcs
1776966503	10.8 Volt	28.3 *C	9 Satt	147 Pcs
1776966199	10.9 Volt	28.2 *C	8 Satt	146 Pcs
1776965899	10.9 Volt	28.3 *C	10 Satt	145 Pcs
1776965594	12.5 Volt	28.3 *C	10 Satt	144 Pcs
1776965292	12.5 Volt	28.6 *C	11 Satt	143 Pcs
1776964992	12.5 Volt	28.8 *C	9 Satt	142 Pcs
1776964691	10.6 Volt	29 *C	10 Satt	141 Pcs
1776964391	10.7 Volt	29.1 *C	10 Satt	140 Pcs
1776964091	10.6 Volt	29.3 *C	9 Satt	139 Pcs
1776963790	10.7 Volt	29.5 *C	9 Satt	138 Pcs
1776963490	10.5 Volt	29.5 *C	9 Satt	137 Pcs
1776963189	10.7 Volt	29.5 *C	9 Satt	136 Pcs
1776962889	12.2 Volt	29.5 *C	9 Satt	135 Pcs
1776962589	12.4 Volt	29.2 *C	9 Satt	134 Pcs
1776962290	12.2 Volt	28.8 *C	9 Satt	133 Pcs
1776961986	12.3 Volt	28.5 *C	9 Satt	132 Pcs
1776961085	12.4 Volt	27.5 *C	11 Satt	129 Pcs

*Used Equation Coefficients:

DcIn: 0, 0.1, 0

Ext.AIn: 0, 0.1, 0

Temp: 0, 0.1, 0

Gps: 0, 1, 0

TxCnt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)