This is the latest recevied telemetry packets stored in our database for station/object E24IFG-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RxTraffic*
TxTraffic*
Temp*
GPS*
Voltage*
1753456428
91 Pkt
36 Pkt
36.7 C
10 Sat
13.14 V
1753454995
95 Pkt
31 Pkt
37.5 C
9 Sat
13.91 V
1753454399
5 Pkt
1 Pkt
35.8 C
8 Sat
13.91 V
1753442642
88 Pkt
36 Pkt
40.8 C
8 Sat
13.97 V
1753440892
71 Pkt
7 Pkt
40 C
9 Sat
12.26 V
1753440297
5 Pkt
2 Pkt
38.3 C
9 Sat
12.52 V
1753439796
83 Pkt
17 Pkt
38.3 C
10 Sat
13.91 V
1753439202
79 Pkt
35 Pkt
39.2 C
10 Sat
14.28 V
1753438606
5 Pkt
1 Pkt
38.3 C
8 Sat
13.66 V
1753438183
5 Pkt
3 Pkt
38.3 C
8 Sat
13.35 V
1752809870
4 Pkt
5 Pkt
39.2 C
10 Sat
14.07 V
1752809518
4 Pkt
5 Pkt
38.3 C
10 Sat
13.97 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
Temp: 0, 1, 0
GPS: 0, 1, 0
Voltage: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)